Factory Fiber Optic Distribution Cabinet Outdoor Street Cross Connect Cabinet

• Type: Active Optical Cable
• Certification: CE, ISO, GS
• Condition: New
• Size: 1035mmx550mmx310mm
• Material: SMC or Stainless Steel
• Adapter: Sc/LC/FC/St
• Model NO.: DT-FCCC-144-SMC/SS
• Transport Package: 100 Pieces in a Box, Safe Packaging
• Specification: ISO 9001, CE, SGS
• Trademark: DAYTAI Technology
• Origin: Hangzhou, Zhejiang Province, China
• Production Capacity: 50000 PCS/Month

Product Description

★Description
 
144 Core Fiber Optic Cross Connect Cabinet,Maximum  installation 6PCS ABS Box Type PLC
Splitter,Installation Ways:Floor Installation,Wall-Mounted,Pole Installation is
optional,Size:1035mmx550mmx310mm,Cabinet Material:SMC or Stainless Steel is Optional.Maximum
installation:Total 144Core (12PCSx12Core Fusion Splicer trays) SC/LC/FC/ST...Adapter and Pigtail is
Optional,APC or UPC is Optional.


★Features

⊙ Large capacity: the maximum distribution capacity is144-cores four types of optical fiber cables, and the capacity of direct welding is single.

⊙The cabinet is equipped with horizontal wiring duct, and makes the optical cable layout more reasonable and tidy.

⊙ The cabinet adopts special high-strength corrosion-resistant materials, has good waterproof, anti-condensing, moisture resistance properties, and can stand various adverse effects caused by climate and environment.

⊙Adopts the terminal tray integrating welding and distributing. Welding and distributing are performed at the same level, which makes the operation convenient, reduces the length of ribbon tail fiber and lowers the cost.

⊙The terminal module adopts the horizontal draw-out structure with 12 cores as a unit, each core can be drawn out separately, which makes it convenient to operate in distributing, and reduces the number of bends arising from the distributing of tail fiber.

⊙The optical fiber splitter is structurally reasonable, the optical fiber cable core is sheathed with sleeve, and the fixing, grounding and other operation on optical fiber cable can be performed, without removing the optical fiber splitter.

★Major Technical Requirements

1. Service conditions
Working temperature: ―5ºC~+40ºC (indoor), ―40ºC~+60ºC (outdoor)
Relative humidity: <=85% (at +30ºC) (indoor), <=95% (at +40ºC) (outdoor)
Atmospheric pressure: 70kPa~106kPa
2. Technical indicators of optical fiber connector
   (1) The insertion loss does not exceed 0.5dB.
   (2) Return loss: that of APC type is not less than 60dB, that of UPC is not less than 50dB, and that of PC type is not less than 40dB.
3. High-voltage protective grounding device
(1) Voltage withstand level
The voltage withstand level between the grounding device and the metal part of box is not less than 3000V (DC) within 1min.
(2) The high-voltage protective grounding is connected with the metallic strength member, metallic moisture-blocking layer and the armor layer in the optical cable, and the sectional area of ground wire exceeds 6mm2.
(3) Insulation resistance
The insulation resistance between the grounding device and the metal part of box is not less than 2×104mΩ,and the test voltage is DC500V.
4. Suitability requirements
   (1) The optical fiber cables shall conform to Standard GB/T7424 and GB/T11819.
 (2) The nominal operating wavelength is: 1310nm, 1550nm.
5. Mechanical strength
The cabinet appearance can stand at least 980N of pressure vertical to the appearance. After the cabinet door is opened, it can stand at least 200N pressure from the most outer end of the door.
6. Sealing performance
The cabinet is in locked state. The protection performance of indoor equipment can reach the requirements of IP53 as specified in GB4205, and that of outdoor type can reach the requirements of IP65 as specified in GB4208.  


★Specification


 

Item	Fiber Optic Cross Connect Cabinet Specification
	Product Name	72 Core Cabinet	96 Core Cabinet	144 Core Cabinet	288 Core Cabinet	576 Core Cabinet
	DAYTAI Model	DT-FCCC-72-SMC/SS	DT-FCCC-96-SMC/SS	DT-FCCC-144-SMC/SS	DT-FCCC-288-SMC/SS	DT-FCCC-576-SMC/SS
Cabinet	Unit	1	1	1	1	1
12-cores integrated module(Sets)	Sets	6	8	12	24	48
SC/LC/FC/ST...Adapter and Pigtail(Pieces)	Pieces	72	96	144	288	576
ABS Box Type PLC Splitter(PCS)	PCS	6	6	6	8	16
Bundle fiber or ribbon fiber(Piece)	Piece	6	8	12	24	48
Heat shrinkage tube(Piece)	Piece	As per the actual equipment
Hose clamp(Pieces)	Pieces	4	4	6	18	24
Direct welding board(Pieces)	Pieces	2	2	3	5	10
Foundation bolt M12×250(Pieces)	Pieces	4	4	4	4	4
Grease(Bag)	Bag	1	1	1	1	2
Nylon binding tape(Pieces)	Pieces	15	15	20	40	80
Protective casing(Meter)	Meter	5	5	5	10	20
Product manual(Copy)	Copy	1	1	1	1	1
Product description(Copy)	Copy	1	1	1	1	1

 

 

 

★Pictures

Our advantages

* As a world class manufacturer we can ensure you are getting world class quality at a competitive price.

* We pride ourselves on earning our clients repeat business. We ensure customer satisfaction by ensuring all out products meet world ISO 9001, SGS, CE standards and best manufacturing practices.

* We also pride ourselves by ensuring we give you our client the best service and experience dealing with a reputable manufacturer.

Customer first, service foremost 

If you have any other questions, please feel free to contact with me.
I will reply you at my first time.
Thank you for visiting our products, have a good day:)