Customization: | Available |
---|---|
Type: | Blockless PLC Splitter |
Certification: | CE, ISO, RoHS |
Still deciding? Get samples of US$ 4/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Category | Specification | Remarks | |
Fiber Type | G657A or G652 | ||
The 0.9mm Tube | Outer Diameter | 900um | |
Material | Hytrel | ||
Colour | Translucentc | Multicolor | |
Length | L1±50mm | L≥0.3M | |
Connector type | SC,FC,LC | ||
Number tube NO: | IN/Input No./Output |
Category | Specification | Remarks | ||
Working Wavelength | NM | 1260~1650 | ||
Test Wavelength | nm | 1310&1490&1550 | ||
Insertion Loss | exclude connector | dB | ≤13.5 | |
With connector | dB | ≤14.0 | ||
Channel Uniformity | dB | ≤1.2 | ||
Polarization Dependent Loss-PDL | dB | ≤0.3 | ||
Directivity | dB | UPC≥50;APC≥55 | With connector | |
Return Loss | dB | UPC≥50;APC≥55 | With connector | |
Operating Temperature | ºC | -40~+85 |
Region Defect |
Region A (0~25um) |
Region B (25~125um) |
Region C (125~250um) |
Scratch | Allow one scratch no more than the fiber core and width≤1um | Allow two scratchs and the width≤2um | Allow five scratchs and width≤2um |
Speckle | Allow one speckle no more than the fiber core and diameter≤1um | Allow two speckles and the diameter≤2um | Allow two speckles and the diameter≤5um |
Apron | Between area B and area C,allow apron which aperture width less than 5um;and the length of the apron is less than 30% of the perimeter of the fiber end |
Project | Test condition | Index | Appearance |
High Temperature | 85ºC,200H | ΔIL≤0.5dB; ΔRL≤5dB; |
No deformation, relaxation, crack and fracture |
Low Temperature | -40ºC,200H | ||
Temperature Cycle | -40~+85ºC,3.5H/Cycle, 30 cycles |
||
Hot and humid | 110ºC,90%~95%RH,2 atmospheric pressure,96H | ||
Immersion | 25±5ºC, PH5.5±0.5,168H |
Project | Test condition | Index | Appearance |
Impact | 1.8m, three axial, 8 times / axial | ΔIL≤0.5dB; ΔRL≤5dB; |
No deformation, relaxation, crack and fracture |
Vibration | 10 to 50HZ, 45 times /min, amplitude 0.75mm, three axial. Each axial 30min | ||
Reverse | Distance machine 20 to 28cm, ± 180°,10times/min, 25 times,0.9mm tube load 4N.2.0mm tube load 15N | ||
tensile | The distance from the plug is 20 to 28cm, 1min, and the load is 10N |