CATV 1550nm 1 Way Output EDFA Optical Amplifier

• Customization: Available
• Type: Olt
• Certification: CE, ISO
• Model NO.: DT-EDFA-1 x XXdBm
• Condition: New
• Operating Temperature Range: -5 - +55 °c
• Maximum Operating Relative Humidity: Max 95% No Condensation
• Storage Temperature Range: -30 - +70 °c
• Maximum Storage Relative Humidity: Max 95% No Condensation
• Power Supply Voltage: AC160V-250V (50 Hz)
• Transport Package: Carton
• Trademark: DAYTAI
• Origin: Hangzhou, Zhejiang
• Production Capacity: 8000 PCS/Month

Product Description

★Description

This manual applies to EDFA Optical Amplifier 1 Way Output (DT-EDFA-1 x XXdBm) series 1550nm EDFA. It mainly describes the performance characteristics, technical parameters, installation and debugging, common troubleshooting, and other related content of the product. In order to ensure that the equipment can be successfully installed and safely operated, please read this manual carefully before installing and debugging the equipment. And the installation and debugging should be strictly according to the specified steps on the manual to avoid unnecessary damage to equipment or accident harm to the operator. Any questions, please contact with us in time.
 

★Product Summary

EDFA Optical Amplifier 1 Way Output (DT-EDFA-1 x XXdBm) series 1550nm optical fiber amplifier is the important optical relay transmission equipment in 1550nm optical fiber communication system. It mainly used for the long distance optical fiber transmission of TV image signal, digital television signal, telephone voice signal and data (or compressed data) signal. This product does use the high-performance erbium doped fiber and low noise pump laser, and built-in perfect embedded automatic monitoring system, to ensure the excellent performance indicators.


★Performance Characteristics

⊙Automatic control the output optical power. 
⊙The output optical power is adjustable, attenuation range is 0-3dB.
⊙Adopt high-performance erbium doped fiber, high efficiency energy conversion.
⊙Adopt advanced 32 bit processor, coordinate with perfect automatic monitoring systemic circuit. It can timely and accurately monitor optical output power and various work status of the pump laser, ensures the stable optical output power and can effectively extend the working life of the pump laser.
⊙Built-in blue screen 160×32 dot matrix LCD monitor on the front panel, accurately showing all working status parameters.
⊙19″1U height standard rack mount, equipped standard IEEE802.3 10Base-T Ethernet interface and RS232 interface, can expediently realizes network management monitoring. 
⊙Full support <GB/T 20030-2005HFC Network device management system specification>.

★Link test conditions

Special instructions: The performance parameters of this manual according to the measuring method of GY/T 184-2002 < CATV system analog opticalfiber amplifier technical requirements and measuring method>, and tested in the following conditions. 
Test condition: With standard optical fiber and standard optical receiver composed the test link. Set 59 PAL-D analog TV channel signal at 550MHzfrequency range under the specified link loss. Transmit digital modulation signal at range of 550 MHz ~ 862MHz, the digital modulation signal level (in 8 MHz bandwidth) is 10dB lower than analog signal carrier level. When the input optical power of optical receiver is -1dBm, measure the C/CTB, C/CSO and C/N.

★Specification

Item		Unit	Technique parameter	Remark
Operating bandwidth		nm	1535 - 1565
Input optical power range		dBm	-3 - +10	Suggested input optical power  0 - +5dBm
Output optical power		dBm	13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24	Optional
Output power stability		dBm	±0.2
Noise figure		dB	≤ 5.0	Input optical power0dBm
Return loss	Input	dB	≥ 45
	Output	dB	≥ 45
Pump leakage power	Input	dBm	≤ -30
	Output	dBm	≤ -30
Optical connector type			FC/APC or SC/APC
Power supply voltage		V	AC160V - 250V (50 Hz)
Consumption		W	< 30
Operating Temperature Range		°C	-5 - +55
Maximum operating relative humidity		%	Max 95% No Condensation
Storage Temperature Range		°C	-30 - +70
Maximum storage relative humidity		%	Max 95% No Condensation
Dimension		mm	483(W)×340(D)× 44(H)