| Customization: | Available |
|---|---|
| Certification: | CE, ISO, RoHS, GS |
| Condition: | New |
|
Still deciding? Get samples of US$ 0/Meter
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
★Description
EONU 4GE+CATV SF RF(DT-EONU+4GE+CATV SF RF) is fiber to the home multi service access EPON ONU. It's based on the mature, stable, high cost performance EPON technology and has gigabit Ethernet switching, WDM and HFC technology. DT-EONU+4GE+CATV SF RF series has a higher bandwidth, higher reliability, easy management and good quality of service (QoS) guarantee with technical performance of equipment meet the IEEE802.3ah requirements and have good compatibility with third party manufacturers OLT.
★Feature
⊙Support port flow control
⊙Up to 20KM transmission Distance
⊙Support software online upgrading
⊙In compliant with IEEE802.3ah Standard
⊙Support port mode of VLAN configuration
⊙Support Dynamic Bandwidth Allocation (DBA)
⊙Support port isolation between different ports
⊙Support broadcasting storm resistance function
⊙Wi-Fi series meet 802.11 n/b/g technical standards
⊙Support port-based rate limitation and bandwidth control;
⊙Support ACL and SNMP to configure data packet filter flexibly
⊙Support power-off alarm function ,easy for link problem detection
⊙Support data encryption, group broadcasting, port Vlan separation ,etc.
⊙Support ONU auto-discovery/Link detection/remote upgrade of software;
⊙EMS network management based on SNMP ,convenient for maintenance
⊙Specialized design for system breakdown prevention to maintain stable system
★Specification
| Item | Parameter |
| PON Interface | 1 EPON optical interface Meet 1000BASE-PX20+ standard Symmetric 1.25Gbps upstream/downstream SC/APC single-mode fiber split ratio: 1:64 Transmission distance 20KM |
| User Ethernet Interface |
4*10/100M or 4*10/100/1000M auto-negotiation Full/half duplex mode RJ45 connector Auto MDI/MDI-X 100m distance 1 RF output Female F-Type Connector |
| Power Interface | 12V DC Power supply |
| PON Optical Parameter |
Wavelength: Tx 1310nm, Rx1490nm Tx Optical Power: 0~4dBm Rx Sensitivity: -27dBm Saturation Optical Power: -3dBm |
| Data Transmission Parameter |
PON Throughput: Downstream 980Mbps; Upstream 950Mbps Ethernet: 100Mbps or 1000Mbps Packet Loss Ratio: <1*10E-12 latency: <1.5ms |
| Business Capability |
Layer 2 wire speed switching Support VLAN TAG/UNTAG,VLAN translation Support Port-based speed limitation Support Priority classification Support storm control of broadcast Support loop detection |
| Network Management |
Support IEEE802.3 QAM, ONU can be remotely managed by OLT Support Remote management through SNMP and Telnet Local management |
| Management Function |
Status monitor, Configuration management, Alarm management, Log management |
| Shell | Plastic casing |
| Power | Power consumption: 4FE+CATV: <6.5W 4FE+WIFI+CATV: <9W 4GE+CATV: <7.5W 4GE+WIFI+CATV: <10W |
| Physical Specifications |
Item Dimension:170mm(L)*130mm(W)*30mm(H) Item weight:0.3kg |
| Environmental Specifications |
Operating temperature: 0 to 50ºC Storage temperature: -40 to 85ºC Operating humidity: 10% to 90%(Non-condensing) Storage humidity: 10% to 90%(Non-condensing) |
| Indicator | Description | ||
| 1 | PWR | Power status | On: The ONU is power on Off: The ONU is Power off |
| 2 | CATV | CATV status | On:CATV optical normal Off:The CATV signals are not received |
| 3 | WIFI | WIFI | Blinking:Data is being transmitted On:Wi-Fi function Open Off: Wi-Fi function Close |
| 4 | LAN1-4 | LAN port status | On: Ethernet connection is normal Blinking: Data is being transmitted through the Ethernet port Off: Ethernet connection is not set up |
| 5 | LOS | EPON optical signals | On: Optical power lower than receiver sensitivity ; Off: Optical in normal |
| 6 | PON | ONU Register | On: Success to register to OLT Blinking: In process of registering to OLT Off: Failed to register to OLT; |
| Item | Parameter |
| Wavelength | 1550nm |
| Optical return loss | >45dB |
| Input optical power | -18dBm~0dBm |
| RF frequency | 47MHz~1000MHz |
| RF output lever | 78dBuV (@-12~-2dBm@85MHz) |
| CNR | >41dB (@-10dBm@DS22 Channel) |
| CSO | >60dBc (@-10dBm@DS22 Channel) |
| CTB | >60dBc (@-10dBm@DS22 Channel) |
| RF output return loss | >12dB |
| RF impedance | 75Ω |
| AGC function | Support |
| Item | Parameter | |
| Performance parameters |
Operating Mode | Router or bridge |
| Antenna gain | 5dBi | |
| Throughput | IEEE 802.11b: 11Mbps IEEE 802.11g: 54 Mbps IEEE 802.11n: 300Mbps |
|
| Frequency | 2.412 ~ 2.472 GHz | |
| Channel | 13*Channel, configurable to meet the standard of USA, Canada, Japan and China | |
| Modulation | DSSS , CCK and OFDM | |
| Coding | BPSK, QPSK, 16QAM and 64QAM | |
| RF receive sensitivity | 802.11b: -83dBm @ 1 Mbps; -80dBm @ 2 Mbps; -79dBm @ 5.5 Mbps; -76dBm @ 11 Mbps 802.11g: -85dBm @ 6 Mbps; -84dBm @ 9 Mbps; -82dBm @ 12 Mbps; -80dBm @ 18 Mbps; -77dBm @ 24 Mbps; -73dBm @ 36 Mbps; -69dBm @ 48 Mbps; -68dBm @ 54 Mbps 802.11n 20MHz: -74dBm @ 65 Mbps; -70dBm @ 130 Mbps; 802.11n 40MHz: -70dBm @ 135 Mbps; -67dBm @ 300 Mbps; |
|
| RF output lever | 802.11b: 17 ±0.5dBm @11Mbps 802.11g: 15 ±0.5dBm @ 54 Mbps; 16 ±0.5dBm @ 48 Mbps; 17 ± 1dBm @ 6 ~ 36 Mbps 802.11n 20MHz: 14 ± 0.5dBm @ 130 Mbps; 15 ± 0.5dBm @ 78 Mbps; 18 ± 0.5dBm @ 6.5 Mbps 802.11n 40MHz: 14 ± 0.5dBm @ 300 Mbps; 15 ± 0.5dBm @ 162 Mbps; 18 ± 0.5dBm @ 13.5 Mbps |
|
| Encryption Mode | 802.11i security: WEP-64/128, TKIP (WPA-PSK) and AES (WPA2-PSK) | |
){kind=link}